Screws-economical terminals, can be welded directly on the PCB Board. Spacing between 3.5mm and 7.62mm, you can connect section is 0.05 mm2 wire to 8.37mm2, in order to achieve reliable connections.
Using the principle of crimping a box lifting, in order to achieve more reliable connections, it can work in harsh environments such as vibration. Spacing between 3.5mm and 10.16mm, you can connect section is 0.05 mm2 wire to 8.37mm2.
Plug-in terminal block female end, easy maintenance and testing, provides horizontal, vertical, or into the line of the different requirements in the same direction. Spacing between 3.5mm and 7.62mm, you can connect section is 0.05 mm2 wire to 8.37mm2.
Pluggable terminal block end, you can choose different stitch directions in order to free with a variety of end uses. 3.5mm to 7.62mm
Pitch:5.00mm，5.08mm，7.50mm，7.62mm
Through the Terminal, easy and reliable connection. Spacing between 8mm and 18.5mm, you can connect section is 0.05 mm2 wire to 8.37mm2.
From the screw terminals, dependence on use of shrapnel cord grip. No special tools needed, fast connection, easy to use, shock-resistant, anti-loose. Spacing between 2.5mm and 10.16mm, you can connect section is 0.05 mm2 wire to 8.37mm2
Through type with fuse terminal blocks, junction at the same time, ensure the circuit under the current row. 10MM, you can connect wire of cross-section 0.5 mm2 to 2.5mm2.
Fuse terminal blocks, ensure the safety of circuits, where appropriate with the current range of important components.
Quick plug, faster and secure connection.
Fencing us standard blocks, simple structure, convenient wiring, are widely used in the power, industrial control and other fields. Spacing between 6.35mm and 21mm, you can connect wires cross section 0.32 mm2 to 33.62mm2
Panel type terminal blocks or with simple screw, position the terminal ends in turn off the device, Terminal block connections on both sides. Spacing of 8. From 5mm to 60mm, you can connect cross-section 1.5 mm2 wire to 177mm2
Two-tier plate, to minimize the terminal space, using space as much as possible of the wiring. Spacing between 8.8mm and 10.5mm, you can connect wires cross section 0.32 mm2 to 3.33mm2
DIN rail terminal blocks, through card standard in order to achieve orbital slots for mounting in the application on the device. Spacing of 8. From 5mm to 60mm, you can connect cross-section 1.5 mm2 wire to 177mm2
Double rail type, which can reduce the rail area occupied by spatial connection as much as possible. Spacing between 8.8mm and 10.5mm, you can connect wires cross section 0.32 mm2 to 3.33mm2
This series provides a solution for power supply through the housing. It is very suitable for EMC filters, drive system split structure converters and sealed devices.
